where can i find the product key for my garmin etrex vista h

The GPS is set to NMEA in/out at 4800 baud and displaying that it is 'connected'. dmesg and lsusb match what SSamiK had except that mine never worked from the start. Gpsd: GPS device usb: nonexistent or can't be readĪs you can see I tried using 'usb:' but it also failed like '/dev/ttyUSB0' did. Gpsd: read-only device open failed: No such file or directory Gpsd: device open failed: No such file or directory - retrying read-only Well I seem to be having the same exact problem as the original post. Have to reboot to get the ttyUSB0 device unfreeze. Also, I cannot kill the above gpsd with kill -9. Stty -F /dev/ttyUSB0 ispeed 4800 ospeed 4800 and it just freezed. The correct Baud rate should be 4800 (say so on my 60csx's interface setting). Gpsd: opening GPS data source at '/dev/ttyUSB0' Gpsd: successfully connected to the DBUS system bus Gpsd does not work with the usb:, I don't think.Īnyway, getting ttyUSB0 back with garmin_gps doesn't work either: That produces the kml format required by Google Maps. Sudo gpsbabel -i garmin -o kml usb: /tmp/wp.kml I was able to transfer my waypoints off my Garmin eTrex Vista CX with this command line: If the garmin_gps or usbserial modules are already running the device this will not work. This module basically pretends to be a serial interface to a Garmin device connected via usb.ĭepending on what applications you use to access your Garmin, you should be able to supply the name 'usb:' instead of /dev/ttyUSB0 (or whatever) and the software will search the USB busses for the right device.

The reason the 'garmin_gps' module was blacklisted is that it's been fairly unreliable, according to various sources on the net. I just went through some of these issues myself and decided to document the results.

Where can i find the product key for my garmin etrex vista h